Index . 블로그창고 . Any comments?

\cat palm, software

This page has been closed. I created Q&A forums for my Palm applications. Please visit http://here.isnew.info.

WikiZ
Tsk2Cal
Cal2Tsk
Event Floater
LyME libraries

WikiZ


Hello,

Thank you very very much for your very fast reaction!!!

You asked for the reasons of a pen stroke:

Yes a pen stroke requires "a lot more actions" but

one click interferes with set cursor, I can't edit the link text any more without deleting the tags.

double click interferes with the default word marking

double click normaly marks the word. tripple click marks the line.

If a link consists of two words, double click works a litte bit confusing: sometimes one word is marked, sometimes a jump is done.

Very often the click "hits through" the jump goal: a jump is done and then at the new "page" again a click is perfored at the same coordinates.

So, I think, a third option to activate a link with a pen stoke might help to avoid the interferings. And everybody could select the way he likes most.

Thanks again for your improvements -- Gregor

That sounds right. I've added this feature to TODO list. Thanks for the idea. -- Huidae Cho

0.0.2d 테스트 결과 주소록 점프 잘 합니다. first name, last name, 또는 firstname(spc)lastname 이렇게 해보았는데, 잘 됩니다. Task는 0.0.2c에서도 잘 된것 같은데, 제가 인지하지 못한 문제가 있었나보군요. 한가지, tag를 제가 Task에 대해서 ::를 왼쪽으로, :를 오른쪽으로 지정했더니 작동 안하더군요. 같은 부호를 두개 쓰는것과 하나 쓰는 것이 구분이 안되나요? 다른 부호를 쓰니 잘 됩니다.

기본적으로 탭한 위치의 왼쪽에 닫는 태그가 있으면 링크 바깥이라고 인식합니다. ::의 두번째 :가 닫는 태그이므로 링크가 안 되지요. 가능하면 애매한 태그는 피하는 것이 좋습니다. ::A::B: 라고 할 경우 A에도 링크가 걸리고 B에도 링크가 걸리나요? 사실 [메모]와 [할일]t도 겹치기는 합니다만 왼쪽 태그의 길이가 같을 경우 길이가 더 긴 오른쪽 태그를 따르게 했습니다. 그보다 더 우선은 왼쪽 태그의 길이가 더 긴 것이고요. [메모]와 t[할일]에서 할일이 우선이지요.
그렇군요. 설명 감사드립니다. -JJ

어쨌든 현재 버젼으로도 훌륭히 제가 쓰고싶은 목적으로 쓸 수 있겠습니다. freewarepalmbrighthand에도 소개하셨던데, 왜 많은 사람들이 관심을 갖지 않는지 이해가 안되는군요. thread가 줄줄이 붙을 줄 알았는데 말입니다.

생각보다는 위키를 자주 쓰지 않아서 그럴 겁니다.

FreeBSD 괜찮나요? LINUX에 관심을 가지고 이것저것 설치도 해보고 했지만, 하는 일이 컴퓨터쪽이 아니다 보니 활용도가 떨어져서 얼마 있다가 다시 지우기를 벌써 얼마나 여러번 했는지 모릅니다. Palm programming을 위해 한번 다시 시도를 해볼까 싶습니다. 순수히 개인적 호기심으로 말이죠.

저도 컴퓨터쪽이 아니라서 이렇게 팜용 프로그램을 짜고 있는게 다른 사람 보기에는 완전히 삽질이지요. 지금 이러고 있을 때가 아니니 말입니다. -.-;; 그래서 괜히 손 댄게 아닌가 싶기도 합니다. 사실 하나 더 필요한 게 생각났는데 망설이고 있습니다. 지금의 ToDo Transfer가 할일을 달력으로 옮길 때 예정일에다가 옮겨 버리는 바람에 언제 마쳤는지를 알 수가 없습니다. 예전 할일 DB에는 예정일만 저장되어서 그렇지요.

이번 버젼이 상당히 안정되어보이는데 KPUG에 다시 포스트하셔도 좋을 것 같습니다. 다시 한번 좋은 프로그램 개발과 적극적인 의견수렴/반영에 감사드립니다.

히스토리 기능이 메모장만 왔다 갔다할 때는 안정적이지만 다른 어플과 함께 쓰면 좀 불안정합니다. 링크로 이동하기 전에 현재 레코드를 알아야 하는데 그게 쉽지가 않군요.

좋은 주말 보내십시요. 거긴 따뜻하죠? 올 겨울은 겨울같지 않아 여기도 눈이 없습니다만.. :-) -- JJ

여긴 반팔 입고도 다닙니다. -.-;; 눈이란 거 구경한지가 참 오래 됐군요. ㅎㅎ 즐거운 주말 보내세요. -- Huidae Cho

Hello,

Thanks for WikiZ! I recently converted to PsLink from MegaWiki and was disappointed with the slow speed of PsLink when jumping from WikiCase on my E2. WikiZ is much faster! Also like WikiZ option to disable New Records.

I have two issues/questions:

1) Is the Date function only for dates (e.g., MM/DD/YY, YY-MM-DD) or can links be created for Calender text?

Yes, currently, only date is used for Calendar. Creating a today's record with description would be a nice feature.

2) I upgraded from version b to d, and all my WikiZ settings were gone. Do I need to disable WikiZ prior to upgrade to preserve settings?

WikiZ is still in active development, so preferences' format changes frequently. That is why all the settings you made were erased after upgrade. -- Huidae Cho

Thanks, Jay


Thx for nice program.

1 problem - on TREO there is not possible to config back movement or history. How to solve?

Thanks, Mirek

Treo doesn't have a silkscreen. Does this mean that Treo does not support graffiti but you can tap on a word? Maybe, the built-in keyboard is solution, but it's not currently implemented. Or we can drag across the main screen for history? -- Huidae Cho
Tapping the word is possible on TREO. I'll not recomend it, it selects the word. The same with crossing the screen. Dragging on the empty place followed new line in the same line can be the solution. Or dragging horizontaly anywhere outside of the text on main screen. -- Mirek

Hi! I'd say thanks for a nice program, except I can't because the claimed TX support is apparently not there, in that I install it, configure it, and it doesn't do anything, no matter what I do to it.

I've tried changing tags in the hope that it might recognize something other than the default; it didn't help. I've tried toggling the single-tap option back and forth, and nothing happens either way. I've tried changing the creator IDs for the Memo app to the one ('memo') that's actually used by the TX's Memo app, and that didn't help either. I tried enabling 'Auto enable after reset' and then resetting, and that didn't do anything either.

I've also tested WikiZ in a fresh (newly hard-reset) instance of the Palm TX simulator, doing all the same things to it that I just described doing on my device, and it doesn't work there either. There's no error message or anything; it's just that it doesn't *do* anything, which is supremely infuriating, especially since I've been the better part of two years trying to find some wiki software that would work on this handheld.

Apparently, then, TX support is a problem. I'd take a shot at fixing it myself, but your source code is not available, so I have to ask you about it instead. I'll be glad to serve as beta tester, etc., if the problem is that you have no way to test it on the TX.

-- Aaron (aaron@acephalo.us)

Where can I get the TX simulator? The only OS 5 simulator that I have is not device specific. I've included TX in the tested device list because several users reported WikiZ worked on their TX. Did you check if your TX has any other utilities intercepting events? -- Huidae Cho

OK, I've confirmed that WikiZ 0.0.2h works well on the TX simulator. The simulator's name is "Palm TX BEFIGS Simulator Release Build 63." I guess your setting conflicts with WikiZ event handlers. Try to turn off other hack-like utilities, if you have. Did you try turning on the "New record" option too? -- Huidae Cho


안녕하셨습니까? 버젼이 많이 업데이트 되고, 훨씬 다양해졌군요. 한가지 제안하고 싶은것이 있는데, TX를 쓰다보니 보통 silk screen icon이 보이지 않고 keyboard를 쓰거나 전체 화면으로 쓰는 경우가 대부분입니다. go back을 하고 싶은데 drag할 방법이 없더군요. 혹시 다른 방법이 없을까요? 꾸준한 개선에 감사드립니다. --JJ

실크스크린 이외에 다른 프로그램과 충돌이 나지 않는 방법이 있을까요? 노트패드까지 있어서 메인화면을 드래그하는 것도 안 되겠고 타이틀바에서 드래그하는 방법이 좋을 것 같습니다. 어떨까요? -- Huidae Cho
타이틀바 드래그 하는 방법이 괜찮을것 같습니다. 기본 PIMS 어플중 타이틀바 드래그와 관련된 어플이 없으니 충돌 없을테니 말이죠. 감사합니다. --JJ

Every day is Wikiz better and better. Thank you.

For Treo I recommend Title bar as the main one, using keys can be problematic (conflict with some other applications).

I agree. Maybe, title bar is the way to go. -- Huidae Cho

Other (similar?) solution: Drag&Drop+ is using good trick to activate for example DA – look at http://www.umap.net/MacPalm/index-J.html, section archive. Tapping right lower corner of screen outside of text field activates built in DA launcher.

PiLoc is forcing small icon to the right corner to change language.

Graffiti Anywhere works with corners of screen for activation.

Last possibility is using command bar, but again with possible conflict with other applications because of room available. Command bar can be activated by several applications.

Mirek


Hello Huidae Cho,

Thanks for writing Wikiz. I like the program. I just wanted to inform you about what appears to be a bug in Wikiz: If Wikiz (at least version 0.0.2d and version 0.1) is enabled, my Treo 650 crashes and resets when I try to change a contact's photo in the Contacts application. The Palm debug panel reports a "Fatal Exception" in "Wikiz". If I disable Wikiz, everything is fine.

It is not a big deal for me, but I guess you like to know.

-- Mark Groen

Hi Mark, I've fixed it in 0.1.1. Thank you for the bug report. -- Huidae Cho
Hi Huidae Cho, I confirm it is fixed. Thanks for the quick response. -- Mark Groen

Hi all, Wikiz is very good. But... Please, please, is it possible to force solving history for treo 650? Mirek

Yes, I'm considering that feature, but, unfortunately, don't have much time to spare for my hobby. :-( -- Huidae Cho

Hi and thankyou for the program. Are there any plans for allowing Wikiz to link to more than the standard 5 PIM apps.? I would like to be able to setup links to several other apps. (PSlink allows for 5 additional apps I think). thanks


Tsk2Cal

MATSUOKA Hiroshi's suggestion

risumfiriri's comment

Very useful application, here's a brief description in traditional Chinese http://ap1.palmislife.com/~risumfiriri/greymatter/archives/00000477.htm

Thanks. -- Huidae Cho

Cal2Tsk

Event Floater

안녕하셨어요? 주말이 다가오면서 갑자기 이런 생각이 떠올라서 제안드리려고 합니다. floated event를 지정한 요일 (토요일 또는 일요일)이 되면 그 날짜로 고정하게 하는 기능이 있으면 좋겠다는 생각이 듭니다. 이는 주간메모나 weekly compass 개념을 사용할때 유용할 것 같습니다. 하긴 다른 목적으로 쓰는 floating event가 있다면 (저는 없습니다만) 모두 적용되어서 혼란을 초래할 수도 있겠군요. 그렇다고 주간고정용 따로, 월간용 따로, 그 외에 적용되지 말아야 할 것들을 구분해 준다면 너무 복잡해지겠죠? 혹시 간단히 추가할 수 있는 방법이 있다면 고려해 주시면 감사하겠습니다. --JJ

하루 전의 이벤트를 오늘로 가져오는 대신 일주일 전의 이벤트를 오늘로 가져오는 기능을 말씀하시는 거라면 저도 잠시 생각해봤습니다. 그런데 기능적으로 완료일이 지난 할일들을 계속 오늘로 옮기는 것이 플로팅이벤트라고 한다면 주간메모나 주간계획등을 위해서 이벤트 플로터가 일주일 단위로 그런 기능을 구현한다는 것이 목적에 안 맞는 것 같아서 잊어버렸습니다. 주간계획 같은 것은 wikiz를 이용해서 Tasks에 특정요일에 이벤트를 생성하는 할일을 만들어 두는 것이 더 좋을 것 같습니다. 예를 들어 <*-*-*s 주간계획>은 이번주 일요일에 이벤트를 생성합니다. 여기를 참고하세요. -- Huidae Cho
제가 설명이 부실했던것 같습니다. 다시 말씀 드리면, 제경우 Weekly compass라는 floating event를 일요일에 생성합니다. 일주일동안 잊지말아야 할일들을 노트에 적어놓고 일주일동안 따라오죠. 토요일이 되면 이녀석을 floating에서 일반 event로 바꿉니다. 맨앞의 특수문자를 없애서 말이죠. 이 기능이 자동으로 되면 어떨까해서 제안드렸던겁니다. 즉, 토요일 (또는 일요일)이 되면 어제의 floating event를 오늘(토 or 일) 날짜로 옮겨오면서 맨앞의 특수문자도 동시에 없애줍니다. 다시 말해서 주중에만 floating하다가 주말이 되면 일반 no timed event로 전환되는 것이죠. 좋은 주말 되세요. --JJ
그거였군요. 나중에 시간이 나면 어떻게 할지 생각해 보겠습니다. -- Huidae Cho

Thanks for Event Floater! It doesn't seem to work for repeating events. There are many events that repeat that I'd like to stay on my calendar until they're done (like "Pay Bills" or "Submit Monthly Report").

-- Tim Constantine

I've added the feature to TODO list. -- Huidae Cho

LyME libraries


All the works in this site except software and copyrighted materials by others (e.g., 문학) are licensed under a Creative Commons License. 소프트웨어 및 문학과 같이 다른 이에게 저작권이 있는 작품을 제외하고 모두 크리에이티브 커먼즈 라이센스를 따른다.
Mon Mar 25 01:03:11 2024 . XHTML . CSS (lightbox.css is not part of Uniqki. ;-) . Powered by Uniqki!
refresh . edit . loginout . index